Gate Valve,Butterfly Valve,Air Release Valve,Check valve,Y Strainer,Basket Filter T-Strainer,Globe valve,Flap Valve,Pressure Reducing Valve,Foot Valve,Stabilisateur d’écoulement,Diaphragm Valve
Eccentric Plug Valve FLxFL ends & MJxMJ ends
A style of rotary control valve with a plug-shaped, flow-restricting member that follows an eccentric path as it rotates. The plug has no contact with its seat until it turns within a few degrees of the shutoff position.
Single orifice air valve
Single small orifice air valve with brass isolation valve, ductile iron body, ABS float/support/cap, EPDM rubber seal, zinc-plated
bolts/nuts, dark blue (RAL5005) epoxy coating。
Butterfly Valve Wafer Type
Materials
- Body: Cast iron
- Seat: EPDM
- Lower stem: SS416
- Disc: DI with Nylon coated
- Upper stem: SS416
- Hand lever: Aluminium
Ball check valve
Technical performances
- Full bore ensured.
- Self cleaning ball.
- Low pressure drop.
- Silent.
- Removable Bonnet for cleaning or changing the ball with out disassembly out of the pipeline.
- Horizontal and vertical installation in the pipeline.
Diaphragm Valve
Diaphragm valves are bi-directional, on-off throttle valves. They are used to control fluid flow by regulating the area with which media can enter and exit the valve, effectively changing its speed and velocity.
Flow Stabilizer
Flow stabilizers are used to smooth out water turbulence caused by the water pump forcing the water through pipes and other components such as elbows and tees, etc.
Foot Valve
Foot valves are used at the end of a suction line from an external water source to keep the pump primed at all times with the built-in non return valve, and to avoid any unwanted sludge, debris, leaves or biomatter from entering the pump through the line, using a strainer or filter.
Basket Filter T-Strainer
A T-strainer is a common filter in industrial and commercial applications to remove debris and contaminants from liquids and gasses.
Control Valve
Control valves are control devices that are used to manage and control fluid flow, pressure, temperature, or liquid level by varying the flow passage size. In process systems of production wells, oil and gas plants, Chemical and Petrochemical industries, refineries, and power plants, Control valves are frequently used to control or manage any of the process parameters.
Flap Valve
One-way valves that are put at the open end of a pipeline or culvert are known as flap valves. Their function is to allow downstream water to depart the pipe through a one-way flap door while preventing rising water levels outside the pipe from entering the pipe and flooding the protected area.
Ball Valve
Ball valve is a flow control device which uses a hollow, perforated, and pivoting ball to control fluid flowing through it.
Globe Valve
Globe valves are used to regulate the flow of a fluid and to shut-off the fluid (even if for shut-off operations ball valves and gate valves shall always be preferred). Globe valves are bi-directional valves, differently from check valves, meaning that the fluid can flow either way within the valve.
Y-Strainer
Y Type strainers are named after their shape and are use for course filtration and are used to protect fluid handling systems against the damaging valves, pumps, flow meters and other process plant equipments from foreign particles such as scale, dirt, welding burrs which travel through the pipe.
